Reassembly

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: BRAKE ACTUATOR: REASSEMBLY; 2013 MY FR-S [03/2012 -]

1. INSTALL BRAKE ACTUATOR DAMPER

(a) Install the 3 new brake actuator dampers (A and B) to the brake actuator bracket assembly.





2. INSTALL BRAKE ACTUATOR BRACKET ASSEMBLY





(a) Install the brake actuator bracket assembly to the brake actuator assembly with the 3 new nuts and 3 new washers.

NOTICE:
Do not remove the hole plugs of a new brake actuator assembly before connecting the brake lines because the brake actuator assembly is filled with brake fluid.

Torque : 7.5 Nm (77 kgf-cm, 66 in-lbf)