Installation

U341E AUTOMATIC TRANSAXLE: SPEED SENSOR: INSTALLATION

1. INSTALL SPEED SENSOR NT

(a) Coat a new O-ring with Toyota Genuine ATF WS or equivalent, and install it onto the speed sensor NT.





(b) Install the speed sensor NT with the bolt.





Torque : 5.4 Nm (55 kgf-cm, 48 in-lbf)

(c) Connect the speed sensor NT connector.

2. INSTALL BATTERY CARRIER Installation

3. INSTALL BATTERY TRAY

4. INSTALL BATTERY Installation

5. INSPECT FOR AUTOMATIC TRANSAXLE FLUID LEAK