Reading and Clearing Diagnostic Trouble Codes

METER: METER / GAUGE SYSTEM: DTC CHECK / CLEAR

1. CHECK DTC

(a) Connect a Techstream to the DLC3.

(b) Turn the ignition switch to ON and turn the Techstream on.

(c) Enter the following menu items: Body Electrical / (desired system) / Trouble Codes.

(d) Check for DTCs and then write them down.

HINT
Refer to the tester operator's manual for further details.

(e) Confirm the details of the DTCs Meter / Gauge System.

2. CLEAR DTC

(a) Connect a Techstream to the DLC3.

(b) Turn the ignition switch to ON and turn the Techstream on.

(c) Enter the following menu items: Body Electrical / (desired system) / Trouble Codes.

HINT
Refer to the tester operator's manual for further details.

(d) Erase DTCs by pressing the YES button on the tester.

HINT
Refer to the tester operator's manual for further details.