Installation

2ZR-FE IGNITION: IGNITION COIL AND SPARK PLUG: INSTALLATION

1. INSTALL SPARK PLUG

(a) Install the 4 spark plugs.

Torque : 20 Nm (204 kgf-cm, 15 ft-lbf)

2. INSTALL IGNITION COIL ASSEMBLY

(a) Install the 4 ignition coils with the 4 bolts.





Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)

NOTICE:
Do not damage the rubber ignition coil tips when installing the ignition coils.

(b) Connect the 4 ignition coil connectors.

(c) Connect the camshaft timing oil control valve connector.





3. INSTALL NO. 2 CYLINDER HEAD COVER

(a) Engage the 4 fittings shown and install the No. 2 cylinder head cover by applying pressure to it.





HINT
Make sure that the oil filler cap and the engine oil level dipstick are correctly installed before installing the No. 2 cylinder head cover.