Removal

2ZR-FE ENGINE CONTROL SYSTEM: CAMSHAFT OIL CONTROL VALVE: REMOVAL

1. REMOVE NO. 2 CYLINDER HEAD COVER Removal

2. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY

(a) Remove the bolt and the wire harness bracket.





(b) Disconnect the camshaft timing oil control valve assembly connector (for exhaust camshaft side).





(c) Remove the bolt and remove the camshaft timing oil control valve assembly (for exhaust camshaft side).

(d) Remove the O-ring from the camshaft timing oil control valve assembly (for exhaust camshaft side).





(e) Disconnect the camshaft timing oil control valve assembly connector (for intake camshaft side).





(f) Remove the bolt and remove the camshaft timing oil control valve assembly (for intake camshaft side).

(g) Remove the O-ring from the camshaft timing oil control valve assembly (for intake camshaft side).