Rear On-Vehicle Inspection

WIPER / WASHER: WASHER MOTOR (for Rear Side): ON-VEHICLE INSPECTION

1. INSPECT REAR WASHER MOTOR AND PUMP ASSEMBLY

(a) Check the operation of the rear washer motor and pump.





Text in Illustration





(1) Fill the washer jar with washer fluid.

HINT
The operation should be performed with the rear washer motor and pump installed on the washer jar.

(2) Connect the positive (+) battery lead to terminal 1 of the rear washer motor and pump, and the negative (-) battery lead to terminal 2. Check that washer fluid flows from the washer jar.

OK:

Washer fluid flows from the washer jar.

If the result is not as specified, replace the washer motor and pump.