Installation

WIPER / WASHER: WASHER MOTOR (for Front Side): INSTALLATION

1. INSTALL WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY

(a) Install the windshield washer motor and pump onto the packing of the washer jar.

(b) Install the washer hose.

2. INSTALL WINDSHIELD WASHER JAR ASSEMBLY

(a) Connect the 2 connectors.

(b) Engage the clamp and connect the connector.

(c) Install the guide and the windshield washer jar.

(d) Install the 3 bolts.

Torque : 5.5 Nm (56 kgf-cm, 49 in-lbf)

3. FILL UP WASHER JAR WITH WINDSHIELD WASHER FLUID

(a) Connect the 4 clamps.

(b) Connect the 2 washer hoses.

(c) Fill the washer jar with washer fluid.

4. INSTALL FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY Reassembly

5. INSTALL RADIATOR SUPPORT EXTENSION LH Reassembly

6. INSTALL RADIATOR SUPPORT EXTENSION RH

HINT
Use the same procedure as for the LH side.

7. INSTALL NO. 2 RADIATOR SIDE AIR SEAL Reassembly

8. INSTALL NO. 1 RADIATOR SIDE AIR SEAL

HINT
Use the same procedure as for the No. 2 side.

9. INSTALL FRONT BUMPER ENERGY ABSORBER Reassembly

10. INSTALL FAN SHROUD

Installation