NOUT Sensor Inspection

K41B CVT: REVOLUTION SENSOR (NOUT SENSOR): INSPECTION

1. INSPECT TRANSMISSION REVOLUTION SENSOR (NOUT SENSOR)

(a) Connect the battery into the transmission revolution sensor (NOUT).





Text in Illustration





(b) Wave a magnetic object left and right in front of the transmission revolution sensor tip (5 mm gap or closer) to change the high/low signals while measuring the current.

NOTICE:
Make sure to wave the magnetic object during the inspection. Current will not change without waving the magnetic object as indicated by the arrow in the illustration.

(c) Measure the current according to the value(s) in the table below.

Standard Current:





If the current value is not as specified, replace the transmission revolution sensor (NOUT).