Installation

K41B CVT: REVOLUTION SENSOR (NIN SENSOR): INSTALLATION

1. INSTALL TRANSMISSION REVOLUTION SENSOR (NIN SENSOR)

(a) Apply Toyota Genuine CVT Fluid TC to a new O-ring and install it on the transmission revolution sensor (NIN).

(b) Install the transmission revolution sensor (NIN) onto the CVT with the bolt.

Torque : 5.4 Nm (55 kgf-cm, 48 in-lbf)

(c) Connect the transmission revolution sensor connector (NIN).

2. INSPECT FOR CONTINUOUSLY VARIABLE TRANSAXLE FLUID LEAK Procedures