Installation

1NR-FE FUEL: FUEL SENDER GAUGE ASSEMBLY: INSTALLATION

1. INSTALL FUEL TANK SUCTION TUBE GASKET Installation

2. INSTALL FUEL TANK VENT TUBE ASSEMBLY Installation

3. INSTALL FUEL PUMP GAUGE RETAINER Installation

4. INSTALL FUEL TANK VENT HOSE Installation

5. INSTALL NO. 2 FUEL EVAPORATION TUBE SUB-ASSEMBLY Installation

6. CONNECT NO. 1 FUEL EVAPORATION TUBE SUB-ASSEMBLY





(a) Connect the No. 1 fuel evaporation tube and lock it by pushing in the retainer.

Text in Illustration





NOTICE:
* Check that there are no scratches or foreign objects on the connecting part.
* Check that the No. 1 fuel evaporation tube is inserted securely.
* After installing the retainer, check that the No. 1 fuel evaporation tube is securely connected by pulling on it.

7. CONNECT FUEL TANK WIRE

(a) Connect the fuel tank wire connector.

NOTICE:
After connecting the fuel tank wire connector, check that the fuel tank wire is inserted securely.

8. INSTALL NO. 1 FUEL TANK PROTECTOR Installation

9. INSTALL NO. 2 FUEL TANK CUSHION

10. INSTALL FUEL TANK ASSEMBLY

Installation