Removal

1NR-FE ENGINE CONTROL: AIR FUEL RATIO SENSOR: REMOVAL

1. REMOVE AIR CLEANER AND HOSE Removal

2. REMOVE AIR FUEL RATIO SENSOR

(a) Disengage the 2 clamps and disconnect the air fuel ratio sensor wire from the wiring harness clamp bracket.





(b) Disconnect the connector of the air fuel ratio sensor connector.

(c) Using SST, remove the air fuel ratio sensor from the exhaust manifold.





SST : 09224-00010

NOTICE:
If a component has been dropped or subjected to a strong impact, replace it.