Removal

METER / GAUGE / DISPLAY: COMBINATION METER: REMOVAL

1. PRECAUTION

NOTICE:
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Service Precautions.

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

3. REMOVE INSTRUMENT CLUSTER FINISH NO. 1 PANEL Removal

4. REMOVE COMBINATION METER ASSEMBLY





(a) Remove the 2 screws.

(b) Disengage the 2 clips.

(c) Disconnect the 2 connectors and remove the combination meter.