Removal

BRAKE (REAR): REAR BRAKE FLEXIBLE HOSE: REMOVAL

NOTICE:
If both the RH side hose and LH side hose are disconnected at the same time, be sure to place identification marks indicating the position on each side.

HINT
* Use the same procedure for the RH side and LH side.
* The procedure listed below is for the LH side.

1. REMOVE REAR WHEEL

2. DRAIN BRAKE FLUID

NOTICE:
Immediately wash off any brake fluid that comes into contact with any painted surfaces.

3. REMOVE REAR FLEXIBLE HOSE





(a) Using a union nut wrench 10 mm, disconnect the 2 brake tubes while holding the rear flexible hose with a wrench.

NOTICE:
* Do not kink or damage the brake line.
* Do not allow any foreign matter such as dirt and dust to enter the brake line.

(b) Remove the 2 clips and rear flexible hose.