Replacement

DOOR LOCK: TRANSMITTER BATTERY: REPLACEMENT

1. REMOVE TRANSMITTER HOUSING COVER Removal

2. REMOVE DOOR CONTROL TRANSMITTER MODULE Removal

3. REMOVE TRANSMITTER BATTERY

(a) Disengage the hook and remove the transmitter battery cover.





(b) Remove the battery (lithium battery: CR2016).





NOTICE:
* Do not push the terminals with your finger.
* Do not use excessive force when prying up the battery (lithium battery: CR2016) as this may damage the terminals.
* Do not touch the battery with wet hands. Water may cause it to rust.
* Do not touch or move any components inside the transmitter as this may interfere with its proper operation.

4. INSTALL TRANSMITTER BATTERY

(a) Install a battery (lithium battery: CR2016) with the positive (+) side up, as shown in the illustration.





NOTICE:
* Make sure that the positive (+) side and the negative (-) side of the transmitter battery are correctly matched with the transmitter terminals.
* Do not bend the transmitter battery electrode during insertion.
* Keep the transmitter cover interior free of dust and oil.

(b) Engage the hook and install the transmitter battery cover.





5. INSTALL DOOR CONTROL TRANSMITTER MODULE Installation

6. INSTALL TRANSMITTER HOUSING COVER Installation