Installation

EXTERIOR PANELS / TRIM: REAR BUMPER: INSTALLATION

1. INSTALL REAR BUMPER COVER

(a) Connect the license plate light connector.

(b) Engage the 12 claws and install the rear bumper cover.





(c) Install the 2 clips.

(d) Using a T30 "TORX" socket wrench, install the 2 rear bumper cushions.

2. INSTALL REAR BUMPER SIDE SEAL LH

(a) Install the rear bumper side seal with the 4 clips.

3. INSTALL REAR BUMPER SIDE SEAL RH

HINT
Use the same procedure as for the LH side.