Installation

AUDIO / VIDEO: STEERING PAD SWITCH: INSTALLATION

1. INSTALL STEERING PAD SWITCH LH

(a) Engage the claw and 2 pins.

(b) Install the steering pad switch LH with the screw.

(c) Secure the wire harness on the damper hook.

(d) Connect the connector.

2. INSTALL STEERING PAD ASSEMBLY Installation

3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque : 5.4 Nm (55 kgf-cm, 48 in-lbf)

4. INSPECT SRS WARNING LIGHT

Diagnosis System