Installation

AUDIO / VIDEO: FRONT DOOR SPEAKER: INSTALLATION

HINT
The procedure described below is for the RH side. Use the same procedure for both the RH and LH sides, unless otherwise specified.

1. INSTALL FRONT NO. 1 SPEAKER ASSEMBLY

(a) Using an air riveter or hand riveter, install the front No. 1 speaker with 3 new strike rivets.





NOTICE:





* Do not pry the rivet with the riveter, as this will cause damage to the riveter and mandrel.
* Confirm that the rivets are seated properly against the speaker.





* Do not tilt the riveter when installing the rivet into the speaker.
* Do not leave any space between the rivet head and speaker.
* Do not leave any space between the speaker and door. Firmly hold together the 2 items while installing the rivet.






(b) Connect the speaker connector.

2. INSTALL FRONT NO. 2 SPEAKER ASSEMBLY

(a) Engage the 3 claws and install the front No. 2 speaker.

3. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY Reassembly

4. INSTALL DOOR ASSIST GRIP COVER Reassembly

5. INSTALL FRONT DOOR INSIDE HANDLE BEZEL Reassembly

6. INSTALL FRONT ARMREST BASE UPPER PANEL Reassembly

7. INSTALL FRONT DOOR LOWER FRAME BRACKET GARNISH Reassembly