Removal

SUPPLEMENTAL RESTRAINT SYSTEM: CENTER AIRBAG SENSOR ASSEMBLY: REMOVAL

CAUTION:
Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing Diagnosis System.

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

2. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle) Removal

3. REMOVE UPPER CONSOLE PANEL Removal

4. REMOVE REAR CONSOLE BOX COVER Removal

5. REMOVE REAR CONSOLE BOX SUB-ASSEMBLY Removal

6. REMOVE FRONT CONSOLE BOX Removal

7. REMOVE CENTER AIRBAG SENSOR ASSEMBLY





CAUTION:
Confirm that the negative battery terminal is disconnected before performing the operation. Even an impact to only the airbag sensor will cause the airbag to deploy.

(a) Pull the lever down and detach the connector holder.

(b) Remove the 3 bolts and remove the airbag sensor.