How To Proceed With Troubleshooting

DOOR LOCK: POWER DOOR LOCK CONTROL SYSTEM: HOW TO PROCEED WITH TROUBLESHOOTING

HINT
* Use the following procedures to troubleshoot the power door lock control system.
* *: Use a Techstream.

1. VEHICLE BROUGHT TO WORKSHOP

NEXT -- Continue to next step.

2. INSPECT BATTERY VOLTAGE

Standard voltage:

11 to 14 V

If the voltage is below 11 V, recharge or replace the battery before proceeding.

NEXT -- Continue to next step.

3. PROBLEM SYMPTOMS TABLE

Result





B -- Go to step 5
A -- Continue to next step.

4. OVERALL ANALYSIS AND TROUBLESHOOTING*

(a) Operation Check Operation Check

(b) Terminals of ECU Pinout Values and Diagnostic Parameters

(c) DATA LIST/ACTIVE TEST Scan Tool Testing and Procedures

NEXT -- Continue to next step.

5. REPAIR OR REPLACE

NEXT -- Continue to next step.

6. CONFIRMATION TEST*

NEXT -- END