Installation

EB60 MANUAL TRANSMISSION / TRANSAXLE: SHIFT LEVER ASSEMBLY: INSTALLATION

1. INSTALL SHIFT LEVER ASSEMBLY

(a) Install the shift lever assembly with the 4 bolts.

Torque : 12 Nm (122 kgf-cm, 9 ft-lbf)

(b) Attach the 4 harness clamps to connect the wire harness to the shift lever.

2. CONNECT TRANSMISSION CONTROL CABLE ASSEMBLY

Installation

3. ADJUST TRANSMISSION CONTROL SELECT CABLE Adjustments

4. INSTALL REAR CONSOLE BOX ASSEMBLY

Installation