Disassembly
U760E AUTOMATIC TRANSMISSION / TRANSAXLE: DIFFERENTIAL CASE: DISASSEMBLY
1. REMOVE FRONT DIFFERENTIAL RING GEAR
(a) Put matchmarks on the front differential ring gear and front differential case.
Text in Illustration
(b) Mount the differential assembly in a vise between aluminum plates.
(c) Remove the 12 bolts.
(d) Using a plastic-faced hammer, tap on the front differential ring gear to remove it from the front differential case.
2. REMOVE FRONT DIFFERENTIAL CASE FRONT TAPERED ROLLER BEARING
(a) Using SST, remove the front differential case front tapered roller bearing from the front differential case.
Text in Illustration
SST : 09950-00020
SST : 09950-00030
SST : 09950-40011
09957-04010
SST : 09950-60010
09951-00480
(b) Using SST, remove the front differential case front tapered roller bearing (outer race) and shim from the transaxle housing.
SST : 09308-00010
3. REMOVE FRONT DIFFERENTIAL CASE REAR TAPERED ROLLER BEARING
(a) Using SST, remove the front differential case rear tapered roller bearing from the front differential case.
Text in Illustration
SST : 09950-00020
SST : 09950-00030
SST : 09950-40011
09957-04010
SST : 09950-60010
09951-00480
(b) Using SST, remove the front differential case rear tapered roller bearing (outer race) from the transaxle case.
SST : 09308-00010
4. REMOVE FRONT DIFFERENTIAL PINION SHAFT STRAIGHT PIN
(a) Using SST and a hammer, loosen the staked part of the front differential case.
SST : 09930-00010
(b) Using a 5 mm pin punch and hammer, remove the front differential pinion shaft straight pin from the front differential case.
NOTICE:
Before removing the front differential pinion shaft straight pin, unstake it with a pin punch.
5. REMOVE FRONT NO. 1 DIFFERENTIAL PINION SHAFT
(a) Remove the front No. 1 differential pinion shaft from the front differential case.
6. REMOVE DIFFERENTIAL SIDE GEAR
(a) Remove the 2 front differential pinions, 2 front differential pinion thrust washers, 2 front differential side gears and 2 front No. 1 differential side gear thrust washers from the front differential case.
7. REMOVE FRONT TRANSAXLE CASE OIL SEAL
(a) Using SST and a hammer, remove the front transaxle case oil seal from the transaxle housing.
SST : 09950-60010
09951-00550
SST : 09950-70010
09951-07200
8. REMOVE TRANSAXLE CASE OIL SEAL
(a) Using SST and a hammer, remove the transaxle case oil seal from the transaxle case.
SST : 09950-60010
09951-00650
SST : 09950-70010
09951-07100