Removal

REAR SUSPENSION: REAR TRAILING ARM: REMOVAL

HINT
* Use the same procedure for the RH and LH sides.
* The procedure listed below is for the LH side.

1. REMOVE REAR WHEEL

2. DISCONNECT PARKING BRAKE CABLE Removal

3. DISCONNECT SKID CONTROL SENSOR WIRE LH Removal

4. DISCONNECT REAR NO. 1 SUSPENSION ARM ASSEMBLY LH

(a) Put matchmarks on the rear suspension toe adjust cam, No. 2 camber adjust cam and rear suspension member.

Text in Illustration









(b) Remove the nut, No. 2 camber adjust cam and rear suspension toe adjust cam and disconnect the rear No. 1 suspension arm assembly LH from the rear suspension member.





5. REMOVE REAR TRAILING ARM ASSEMBLY LH





(a) Remove the 4 bolts and trailing arm from the axle carrier and suspension member.