Removal

AXLE AND DIFFERENTIAL: STEERING KNUCKLE: REMOVAL

HINT
* Use the same procedure for the RH side and LH side.
* The procedure listed below is for the LH side.

1. REMOVE FRONT AXLE HUB SUB-ASSEMBLY LH

Removal

2. REMOVE FRONT LOWER BALL JOINT ASSEMBLY LH Removal

3. REMOVE STEERING KNUCKLE LH

(a) Secure the front axle assembly in a vise.

NOTICE:
When using a vise, do not overtighten it.

(b) Remove the 4 bolts and front axle hub sub-assembly from the steering knuckle.

NOTICE:
Do not place the hub and bearing's magnet rotor side so that it is facing downward, and do not allow the magnet rotor side to become damaged or contact foreign matter.