Ignition Switch Lock Cylinder: Testing and Inspection

STEERING COLUMN: STEERING COLUMN ASSEMBLY: INSPECTION

NOTICE:
When using a vise, do not overtighten it.

1. INSPECT PRELOAD

(a) Secure the steering column assembly in a vise.

(b) Using SST, turn the main shaft and measure the preload.

SST : 09616-00011





Standard preload:

0.8 to 1.2 N*m (9 to 12 kgf*cm, 8 to 10 in.*lbf)

If the preload is not as specified, replace the steering column assembly.

2. INSPECT STEERING LOCK OPERATION (w/o Smart Key System)

(a) Check that the steering lock mechanism is activated when the key is removed.





(b) Check that the steering lock mechanism is deactivated when the key is inserted and turned to the ACC position.





HINT
If there is any abnormality, replace the ignition switch lock cylinder assembly or steering column upper bracket assembly.