Removal

2AR-FE FUEL: FUEL SENDER GAUGE ASSEMBLY: REMOVAL

1. REMOVE FUEL SUCTION TUBE ASSEMBLY WITH PUMP AND GAUGE

Removal

2. REMOVE FUEL SENDER GAUGE ASSEMBLY

(a) Disconnect the connector of the fuel sender gauge assembly.





(b) Detach the 3 harness clamps.





NOTICE:
Do not damage the wire harness.

(c) Remove the harness protector from the wire harness.





NOTICE:
Do not damage the wire harness.

(d) Release the lock as shown in the illustration and slide the fuel sender gauge assembly to remove it.





Text in Illustration