Removal

SUPPLEMENTAL RESTRAINT SYSTEMS: OCCUPANT CLASSIFICATION ECU: REMOVAL

1. PRECAUTION

CAUTION:
* Be sure to read Precaution thoroughly before servicing Occupant Classification System.
* Wear protective gloves. Sharp areas on the parts may injure your hands.
NOTICE:
* When removing the front seat assembly RH, perform zero point calibration and the sensitivity check Programming and Relearning.
* When replacing the occupant classification ECU, perform zero point calibration and the sensitivity check Programming and Relearning.

2. REMOVE FRONT SEAT ASSEMBLY RH

Removal

3. REMOVE OCCUPANT CLASSIFICATION ECU

(a) Disconnect the 2 connectors.





(b) Using a screwdriver, detach the claw and remove the occupant classification ECU.

Text in Illustration





HINT
Tape the screwdriver tip before use.