Side Airbag Sensor (for Front Door)

SUPPLEMENTAL RESTRAINT SYSTEMS: SIDE AIRBAG SENSOR (for Front Door): ON-VEHICLE INSPECTION

HINT
* Use the same procedure for the RH and LH sides.
* The procedure listed below is for the LH side.

1. CHECK DOOR SIDE AIRBAG SENSOR (VEHICLE NOT INVOLVED IN COLLISION)

(a) Perform a diagnostic system check Reading and Clearing Diagnostic Trouble Codes.

2. CHECK DOOR SIDE AIRBAG SENSOR (VEHICLE INVOLVED IN COLLISION AND AIRBAG HAS NOT DEPLOYED)

(a) Perform a diagnostic system check Reading and Clearing Diagnostic Trouble Codes.

(b) When the front door of the vehicle or the surrounding area is damaged, check if there is any damage to the door side airbag sensor. If there are any defects as mentioned below, replace the door side airbag sensor with a new one:

* Cracks, dents or chips on the sensor housing.

* Cracks or other damage to the connector.

* Peeling off of the label or damage to the serial number.

CAUTION:
For removal and installation of the door side airbag sensor, be sure to follow the correct procedure.

3. CHECK DOOR SIDE AIRBAG SENSOR (VEHICLE INVOLVED IN COLLISION AND AIRBAG HAS DEPLOYED)

(a) When airbags have deployed as the result of a collision, be certain to replace all door side airbag sensors in the damaged area (anywhere in need of repair). Furthermore, it is also necessary to replace any door side airbag sensors in undamaged areas that have registered a major collision, or which exhibit any of the following abnormalities:

* Cracks, dents or chips on the sensor housing.

* Cracks or other damage to the connector.

* Peeling off of the label or damage to the serial number.

CAUTION:
For removal and installation of the door side airbag sensor, be sure to follow the correct procedure.