Removal

SEAT BELT: REAR SEAT OUTER BELT ASSEMBLY: REMOVAL

HINT
* Use the same procedure for the RH and LH sides.
* The procedure listed below is for the LH side.

1. REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover) Removal

2. REMOVE DECK BOARD ASSEMBLY Removal

3. REMOVE BACK DOOR SCUFF PLATE Removal

4. REMOVE DECK FLOOR BOX LH Removal

5. REMOVE JACK ASSEMBLY Removal

6. REMOVE DECK FLOOR BOX RH Removal

7. REMOVE FRONT DECK FLOOR BOX Removal

8. REMOVE BENCH TYPE REAR SEAT CUSHION ASSEMBLY Removal

9. REMOVE REAR SEAT 3 POINT TYPE BELT ASSEMBLY LH Removal

10. REMOVE SEPARATE TYPE REAR SEATBACK ASSEMBLY LH Removal

11. REMOVE SEPARATE TYPE REAR SEATBACK ASSEMBLY RH

(a) When removing the rear seat outer belt RH:

Remove the separate type rear seatback assembly RH Removal.

12. REMOVE FRONT DOOR SCUFF PLATE LH Removal

13. REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY LH Removal

14. REMOVE LUGGAGE HOLD BELT STRIKER ASSEMBLY Removal

15. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH Removal

16. REMOVE DECK TRIM SIDE PANEL ASSEMBLY RH

(a) When removing the rear seat outer belt RH:

Remove the deck trim side panel RH Removal.

17. REMOVE INNER ROOF SIDE GARNISH CAP LH Removal

18. REMOVE INNER ROOF SIDE GARNISH ASSEMBLY LH Removal

19. REMOVE INNER LOWER ROOF SIDE GARNISH LH Removal

20. REMOVE REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY LH

(a) Remove the bolt and disconnect the rear seat outer belt floor anchor from the vehicle body.

(b) Remove the bolt and disconnect the rear seat outer belt shoulder anchor from the vehicle body.