Removal

SEAT BELT: CHILD RESTRAINT SEAT TETHER ANCHOR: REMOVAL

CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.

1. REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover) Removal

2. REMOVE DECK BOARD ASSEMBLY Removal

3. REMOVE DECK FLOOR BOX LH Removal

4. REMOVE JACK ASSEMBLY Removal

5. REMOVE DECK FLOOR BOX RH Removal

6. REMOVE FRONT DECK FLOOR BOX Removal

7. REMOVE BENCH TYPE REAR SEAT CUSHION ASSEMBLY Removal

8. REMOVE REAR SEAT 3 POINT TYPE BELT ASSEMBLY LH Removal

9. REMOVE SEPARATE TYPE REAR SEATBACK ASSEMBLY LH Removal

10. REMOVE SEPARATE TYPE REAR SEATBACK ASSEMBLY RH Removal

11. REMOVE REAR SEAT HEADREST ASSEMBLY LH

(a) Remove the rear seat headrest.

12. REMOVE REAR CENTER SEAT HEADREST ASSEMBLY

(a) Remove the rear center seat headrest.

13. REMOVE REAR NO. 2 SEAT RECLINING COVER LH Disassembly

14. REMOVE REAR SEATBACK LOCK STRIKER COVER LH Disassembly

15. REMOVE REAR SEAT LOCK CONTROL LEVER SUB-ASSEMBLY LH Disassembly

16. REMOVE REAR SEAT SHOULDER BELT HOLE COVER Disassembly

17. REMOVE SEAT BELT ANCHOR COVER CAP Disassembly

18. REMOVE REAR SEATBACK COVER WITH PAD LH Disassembly

19. REMOVE REAR SEAT SIDE HINGE MALE COVER LH Disassembly

20. REMOVE REAR SEAT SIDE HINGE MALE COVER RH Disassembly

21. REMOVE REAR SEAT SIDE HINGE MALE COVER RH Disassembly

22. REMOVE REAR CENTER SEAT OUTER BELT ASSEMBLY Removal

23. REMOVE REAR SEAT SHOULDER BELT COVER Disassembly

24. REMOVE REAR NO. 2 SEAT RECLINING CONTROL CABLE

(a) Detach the 2 cable clamps and disconnect the 2 cables.

Text in Illustration









(b) Twist the 2 cable ends in the direction indicated by the arrow and remove the 2 cables.

25. REMOVE REAR SEAT HEADREST ASSEMBLY RH

(a) Remove the rear seat headrest.

26. REMOVE REAR NO. 2 SEAT RECLINING COVER RH Disassembly

27. REMOVE REAR NO. 1 SEAT RECLINING COVER RH Disassembly

28. REMOVE REAR SEATBACK LOCK STRIKER COVER RH Disassembly

29. REMOVE REAR SEAT LOCK CONTROL LEVER SUB-ASSEMBLY RH Disassembly

30. REMOVE REAR SEATBACK COVER WITH PAD RH Disassembly

31. REMOVE REAR NO. 3 SEAT RECLINING CONTROL CABLE

(a) Detach the 2 cable clamps and disconnect the 2 cables.

Text in Illustration









(b) Twist the 2 cable ends in the direction indicated by the arrow and remove the 2 cables.