Installation

2AR-FE FUEL: FUEL PRESSURE REGULATOR: INSTALLATION

NOTICE:
Do not try to remove the black nylon tube as it is welded to the fuel suction tube assembly Fuel System: Precaution.

1. INSTALL FUEL PRESSURE REGULATOR ASSEMBLY

(a) Apply gasoline to 2 new O-rings and then install them to the fuel pressure regulator assembly.

(b) Install the fuel pressure regulator assembly.

2. INSTALL FUEL PUMP Reassembly

3. INSTALL FUEL SENDER GAUGE ASSEMBLY Installation

4. INSTALL FUEL SUCTION TUBE ASSEMBLY WITH PUMP AND GAUGE

Installation