Replacement

AXLE AND DIFFERENTIAL: FRONT AXLE HUB BOLT: REPLACEMENT

HINT
* Use the same procedures for the RH side and LH side.
* The procedures listed below are for the LH side.

1. REMOVE FRONT WHEEL

2. DISCONNECT FRONT DISC BRAKE CALIPER ASSEMBLY LH Removal

3. REMOVE FRONT DISC Removal

4. REMOVE FRONT AXLE HUB BOLT LH





(a) Temporarily install 2 nuts and 2 washers to the front axle hub bolt as shown in the illustration.

Text in Illustration





(b) Using SST and a brass bar or an equivalent tool to hold the front axle, remove the front axle hub bolt.

SST : 09611-12010

5. INSTALL FRONT AXLE HUB BOLT LH

(a) Install a washer and nut to a new front axle hub bolt as shown in the illustration.





Text in Illustration





(b) Using a brass bar or an equivalent tool to hold the front axle, install the hub bolt by tightening the nut.

6. INSTALL FRONT DISC Installation

7. CONNECT FRONT DISC BRAKE CALIPER ASSEMBLY LH Installation

8. INSTALL FRONT WHEEL