Installation

LIGHTING (EXT): TURN SIGNAL FLASHER ASSEMBLY: INSTALLATION

1. INSTALL TURN SIGNAL FLASHER ASSEMBLY

(a) Attach the clip and install the turn signal flasher.

(b) Connect the connector.

2. INSTALL POWER STEERING ECU ASSEMBLY Installation

3. INSTALL UPPER INSTRUMENT PANEL SUB-ASSEMBLY

(a) Install the upper instrument panel sub-assembly Installation.

4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

5. CHECK SRS WARNING LIGHT

(a) Check the SRS warning light Diagnosis System.