Reassembly

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: BRAKE ACTUATOR: REASSEMBLY

1. INSTALL BRAKE ACTUATOR BOLT CUSHION

(a) Install the 4 brake actuator bolt cushions to the brake actuator bracket.

2. INSTALL BRAKE ACTUATOR CASE COLLAR

(a) Install the 4 brake actuator case collars to the brake actuator bolt cushions.

NOTICE:
Make sure the collars are in full contact with the cushions.

3. INSTALL BRAKE ACTUATOR BRACKET ASSEMBLY

(a) Install the brake actuator bracket to the brake actuator with the 4 bolts.





Torque : 5.4 Nm (55 kgf-cm, 48 in-lbf)

NOTICE:
Tighten the 4 bolts uniformly in alphabetical order.