Operation Check

DOOR LOCK: POWER DOOR LOCK CONTROL SYSTEM: OPERATION CHECK

1. CHECK POWER DOOR LOCK OPERATION

(a) Check basic functions.

(1) Check that all doors (including the back door) lock when the lock side of the power window regulator master switch assembly (door control switch) or door control switch assembly is pressed, and all doors (including the back door) unlock when the unlock side is pressed.

(2) Check that all doors (including the back door) lock when the driver side door lock key cylinder is turned to lock using the key.

(3) Check that all doors (including the back door) unlock when the driver side door lock key cylinder is turned to unlock using the key.

(b) Check the key lock-in prevention function.

NOTICE:
In order to prevent the key from being locked in, the following inspection should be performed with the driver side door window open.

(1) Turn the ignition switch to ON or ACC.

(2) With the driver side door open, check that all doors (including the back door) unlock immediately after the door lock knob for the driver side door is locked.

(3) With the driver side door open, check that all doors (including the back door) unlock immediately after the lock side of the power window regulator master switch assembly (door control switch) (for manual operation) is pressed.

(4) With the driver side door open, lock the driver side door lock knob and hold it for 1 second or more. Then close the driver side door and check that all doors (including the back door) unlock.

(5) When a condition below is met, unlocking all the doors (including the back door) using the power window regulator master switch assembly (door control switch) will be prohibited.

* The doors are locked using a mechanical key with all doors (including the back door) closed.

* The doors are locked using a door control transmitter with all doors (including the back door) closed.

* w/ Smart Key System:

The doors are locked using an entry lock operation with all doors (including the back door) closed.

(c) Check the security function of the power door lock control system.

* *: w/ Smart Key System

(1) Close all doors (including the back door) and leave the driver side door window open so that the power window regulator master switch assembly (door control switch) can be operated from outside the vehicle. (Step 1)

(2) Open the driver side door and remove the key from the vehicle. With the door still open, lock the door using the lock knob. Hold the outside handle of the driver side door open, and close the door while holding the handle open (confirm that the lock knob remained in the lock position). Then, check that the doors do not unlock when the unlock side of the power window regulator master switch assembly (door control switch) (for manual operation) is pressed from outside the vehicle.

(3) Starting from Step 1, with the key outside the vehicle, close and lock the driver side door using the key (mechanical key*). Then, check that the doors do not unlock when the unlock side of the power window regulator master switch assembly (door control switch) (for manual operation) is pressed from outside the vehicle.

(4) Starting from Step 1, with the key outside the vehicle, close and lock the driver side door using a wireless door lock or entry lock operation*. Then, check that the doors do not unlock when the unlock side of the power window regulator master switch assembly (door control switch) (for manual operation) is pressed from outside the vehicle.

HINT
Check that the security function of the power door lock control system is canceled under the following conditions:

* The ignition switch is turned to ON.
* The driver side door is unlocked using the key.
* The driver side door is unlocked by the wireless or entry unlock operation*.
* *: w/ Smart Key System
* The unlock side of the power window regulator master switch assembly (door control switch) (for manual operation) is pressed after the door lock knob is unlocked manually.
* The doors are unlocked by a wireless operation.

(d) Check the illumination function.

(1) Set the map light switch to the door position.

(2) When the driver side door is unlocked by the key-linked function, or a wireless or entry unlock operation* with the ignition switch off and all doors (including the back door) closed and locked, check that the interior light comes on.

* *: w/ Smart Key System

(3) Check that the interior light turns off in approximately 15 seconds* if the doors have not been opened.

HINT
*: This function can be customized Interior Lighting System.

(e) Check the key-linked 2-step unlock function*.

HINT
*: This function can be customized Customize Parameters.

(1) Lock all doors (including the back door).

(2) Check that only the driver side door unlocks when the driver side door lock cylinder is turned to unlock once using the key and the other doors unlock when the cylinder is turned to unlock consecutively once again.

(f) Check the shift-linked automatic door lock function (for Automatic Transaxle).*

HINT
*: This function can be customized Customize Parameters.

(1) When the following procedures are performed, check that all doors (including the back door) lock automatically.

1 Close all the doors (including the back door).

2 Turn the ignition switch to ON.

3 Engine starts.

4 The shift lever is moved from P to any position other than P.

(g) Check the shift-linked automatic door unlock function (for Automatic Transaxle).*

HINT
*: This function can be customized Customize Parameters.

(1) When the ignition switch is ON and the shift lever is moved to P from any position other than P, check that all doors (including the back door) unlock automatically.

(h) Check the speed-sensitive automatic door lock function.

HINT
The default setting is OFF. If the function is set to OFF, it is necessary to set the function to ON through the customize function in order to perform the check Customize Parameters.

(1) When any door is unlocked and the vehicle is driven at approximately 20 km/h (12 mph) or more, check that all doors (including the back door) automatically lock at once (automatic door lock).

(i) Check the driver side door-linked automatic door unlock function.

HINT
The default setting is OFF. If the function is set to OFF, it is necessary to set the function to ON through the customize function in order to perform the check.

(1) When the driver side door is closed, turning the ignition switch from ON to off and opening the driver side door within 10 seconds will automatically unlock all doors (including the back door).