Installation

AUDIO / VIDEO: QUARTER TRIM SPEAKER: INSTALLATION

HINT
* Use the same procedure for the RH and LH sides.
* The procedure listed below is for the LH side.
* A bolt without a torque specification is shown in the standard bolt chart Standard Bolt - Specified Torque For Standard Bolts.

1. INSTALL REAR SPEAKER ASSEMBLY

(a) Temporarily install the rear speaker by attaching the 2 claws of the rear speaker to the panel.





(b) Install the speaker with the 3 bolts and tighten the bolts in the order shown in the illustration.

NOTICE:
Do not touch the cone of the speaker.

(c) Connect the connector.

2. INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY LH

(a) Install the front quarter trim panel assembly LH Installation.

3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.