Installation

AUDIO / VIDEO: FRONT DOOR SPEAKER: INSTALLATION

HINT
* Use the same procedure for the RH and LH sides.
* The procedure listed below is for the LH side.

1. INSTALL FRONT NO. 3 SPEAKER ASSEMBLY

(a) Attach the 3 claws to install the front No. 3 speaker.

2. INSTALL FRONT NO. 2 SPEAKER ASSEMBLY

(a) Install the front No. 2 speaker with the 2 screws.

(b) Connect the connector.

3. INSTALL FRONT NO. 1 SPEAKER ASSEMBLY

NOTICE:
Do not touch the cone part of the speaker.

(a) Temporarily install the front No. 1 speaker by attaching the 2 claws of the speaker to the door panel.

(b) Using an air riveter or hand riveter, install the front No. 1 speaker with 4 new rivets in the order shown in the illustration.





NOTICE:
* Do not pry the rivet with the riveter as this will cause damage to the riveter and mandrel.






Text in Illustration





* Confirm that the rivets are seated properly against the speaker.






Text in Illustration





* Do not tilt the riveter when installing the rivet to the speaker.
* Do not leave any space between the rivet head and speaker.
* Do not leave any space between the speaker and door. Firmly hold together the 2 items while installing the rivet.






Text in Illustration





(c) Connect the connector.

4. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH Reassembly

5. INSTALL POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Front Passenger Side) Reassembly

6. INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Driver Side) Reassembly

7. INSTALL DOOR ASSIST GRIP COVER LH Reassembly

8. INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG LH Reassembly

9. INSTALL FRONT DOOR LOWER FRAME BRACKET GARNISH LH Reassembly

10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.