Installation

2ZR-FE FUEL: FUEL SENDER GAUGE ASSEMBLY: INSTALLATION

1. INSTALL FUEL SENDER GAUGE ASSEMBLY





(a) Install the fuel sender gauge by sliding it downward.

(b) Connect the fuel sender gauge connector.





2. INSTALL FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY Installation

3. INSTALL FUEL PUMP GAUGE RETAINER Installation

4. CONNECT FUEL TANK VENT HOSE Installation

5. CONNECT FUEL TANK MAIN TUBE SUB-ASSEMBLY Installation

6. INSTALL REAR FLOOR SERVICE HOLE COVER Installation

7. INSTALL REAR SEAT ASSEMBLY Installation

8. INSTALL NO. 2 SEAT LEG COVER Installation

9. INSTALL NO. 1 SEAT LEG COVER Installation

10. INSPECT FOR FUEL LEAK

Precaution