Removal

2ZR-FE ENGINE CONTROL SYSTEM: AIR FUEL RATIO SENSOR: REMOVAL

1. REMOVE FRONT WIPER ARM HEAD CAP Removal

2. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY LH Removal

3. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY RH Removal

4. REMOVE HOOD TO COWL TOP SEAL Removal

5. REMOVE COWL TOP VENTILATOR LOUVER RH Removal

6. REMOVE COWL TOP VENTILATOR LOUVER LH Removal

7. REMOVE FRONT WIPER MOTOR AND LINK Removal

8. REMOVE FRONT AIR SHUTTER SEAL RH Removal

9. REMOVE COWL TOP PANEL OUTER Removal

10. REMOVE NO. 2 CYLINDER HEAD COVER Removal

11. REMOVE AIR FUEL RATIO SENSOR

(a) Disconnect the air fuel ratio sensor connector and clamp.





(b) Using SST, remove the air fuel ratio sensor.

SST : 09224-00010