Installation

2ZR-FE ENGINE CONTROL SYSTEM: CAMSHAFT OIL CONTROL VALVE: INSTALLATION

1. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY

(a) Apply a light coat of engine oil to a new O-ring and install it onto the camshaft timing oil control valve assembly (for intake camshaft side).





NOTICE:
Do not twist the O-ring.

(b) Install the camshaft timing oil control valve assembly with the bolt (for intake camshaft side).





Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)

(c) Connect the camshaft timing oil control valve assembly connector (for intake camshaft side).

(d) Apply a light coat of engine oil to a new O-ring and install it onto the camshaft timing oil control valve assembly (for exhaust camshaft side).





NOTICE:
Do not twist the O-ring.

(e) Install the camshaft timing oil control valve assembly with the bolt (for exhaust camshaft side).





Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)

(f) Connect the camshaft timing oil control valve assembly connector (for exhaust camshaft side).

(g) Install the wire harness bracket with the bolt.





Torque : 8.4 Nm (85 kgf-cm, 74 in-lbf)

2. INSPECT FOR OIL LEAK

3. INSTALL NO. 2 CYLINDER HEAD COVER Installation