Installation

EXTERIOR: FRONT BUMPER: INSTALLATION

1. INSTALL FRONT BUMPER COVER

(a) Engage the 6 claws and install the front bumper cover.

(b) Install the 5 clips.

NOTICE:
Insert the pin hold clip with the slot aligned vertically. Do not rotate the clip after inserting it. After installation, confirm that the slot is vertically.

HINT
Use the same procedure for the RH side and LH side.

(e) Install the clip.

HINT
Use the same procedure for the RH side and LH side.

2. PREPARE VEHICLE FOR HEADLIGHT AIMING ADJUSTMENT Adjustments

3. PREPARE FOR HEADLIGHT AIMING (for Using a Tester) Adjustments

4. PREPARE FOR HEADLIGHT AIMING (for Using a Screen) Adjustments

5. INSPECT HEADLIGHT AIMING Adjustments

6. ADJUST HEADLIGHT AIMING Adjustments