Disassembly

U241E AUTOMATIC TRANSAXLE: SECOND BRAKE PISTON: DISASSEMBLY

1. REMOVE 2ND BRAKE PISTON RETURN SPRING SUB-ASSEMBLY

(a) Place SST on the return spring and compress.





SST : 09387-00060

(b) Using a screwdriver, pry out the snap ring.

(c) Remove the piston return spring.





2. REMOVE 2ND BRAKE PISTON

(a) Apply compressed air (392 kPa, 4.0 kgf/cm2, 57 psi) to the oil hole and remove the 2nd brake piston.





NOTICE:
* Applying the air may cause the piston to jump out. When removing the piston, hold it using a piece of cloth.
* Do not splash ATF with the compressed air.
3. REMOVE 2ND BRAKE PISTON O-RING

(a) Remove the 2 O-rings from the 2nd brake piston.