Removal

SUSPENSION: FRONT STABILIZER BAR: REMOVAL

1. REMOVE NO. 1 ENGINE UNDER COVER

2. REMOVE NO. 2 ENGINE UNDER COVER

3. REMOVE ENGINE UNDER COVER REAR LH

4. REMOVE ENGINE UNDER COVER REAR RH

5. PLACE FRONT WHEELS FACING STRAIGHT AHEAD

6. SECURE STEERING WHEEL Removal

7. REMOVE COLUMN HOLE COVER SILENCER SHEET Removal

8. SEPARATE NO. 2 STEERING INTERMEDIATE SHAFT ASSEMBLY Removal

9. SEPARATE NO.1 STEERING COLUMN HOLE COVER SUB-ASSEMBLY Removal

10. REMOVE FRONT WHEELS

11. LOOSEN FRONT LOWER NO. 1 SUSPENSION ARM SUB-ASSEMBLY LH Removal

12. SEPARATE FRONT LOWER NO. 1 SUSPENSION ARM SUB-ASSEMBLY LH Removal

13. SEPARATE FRONT LOWER NO. 1 SUSPENSION ARM SUB-ASSEMBLY RH

HINT
Perform the same procedure as for the LH side.

14. SEPARATE FRONT STABILIZER LINK ASSEMBLY LH Removal

15. SEPARATE FRONT STABILIZER LINK ASSEMBLY RH

HINT
Perform the same procedure as for the LH side.

16. SEPARATE TIE ROD END SUB-ASSEMBLY LH Removal

17. SEPARATE TIE ROD END SUB-ASSEMBLY RH

HINT
Perform the same procedure as for the LH side.

18. REMOVE FRONT SUSPENSION MEMBER REINFORCEMENT LH Removal

19. REMOVE FRONT SUSPENSION MEMBER REINFORCEMENT RH Removal

20. REMOVE FRONT SUSPENSION MEMBER BRACE REAR LH Removal

21. REMOVE FRONT SUSPENSION MEMBER BRACE REAR RH

HINT
Perform the same procedure as for the LH side.

22. REMOVE FRONT SUSPENSION CROSSMEMBER SUB-ASSEMBLY Removal

23. REMOVE FRONT LOWER NO. 1 SUSPENSION ARM SUB-ASSEMBLY LH Removal

24. REMOVE FRONT SUSPENSION MEMBER FRONT BRACE LH

(a) Remove the 4 bolts and front suspension member front brace LH.





25. REMOVE FRONT SUSPENSION MEMBER FRONT BRACE RH

HINT
Perform the same procedure as for the LH side.

26. REMOVE FRONT STABILIZER BAR

(a) Remove the front stabilizer bar from the front suspension crossmember sub-assembly.





27. REMOVE NO. 1 FRONT STABILIZER BAR BUSH

(a) Remove the 2 No. 1 front stabilizer bar bush from the front stabilizer bar.