Installation

2AZ-FE FUEL: FUEL PRESSURE REGULATOR: INSTALLATION

1. INSTALL FUEL PRESSURE REGULATOR ASSEMBLY

(a) Apply gasoline to 2 new O-rings and then install them onto the fuel pressure regulator assembly.





(b) Install the fuel pressure regulator assembly.





2. INSTALL FUEL PUMP

Refer to the procedures under "INSTALL FUEL PUMP" Reassembly.

3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque : 5.4 Nm (55 kgf-cm, 48 in-lbf)

4. INSPECT FOR FUEL LEAK

Fuel System Precautions