Removal

2AZ-FE EXHAUST: EXHAUST PIPE: REMOVAL

1. REMOVE NO. 1 ENGINE UNDER COVER Removal

2. REMOVE HEATED OXYGEN SENSOR Removal

3. REMOVE TAIL EXHAUST PIPE ASSEMBLY





(a) Remove the 2 bolts and No. 4 exhaust pipe support and remove the tail exhaust pipe assembly.

(b) Remove the exhaust pipe gasket.

4. REMOVE TAIL PIPE BAFFLE





(a) Using a plastic hammer, uniformly tap out and remove the exhaust tail pipe baffle.

5. REMOVE NO. 2 CENTER EXHAUST PIPE ASSEMBLY





(a) Remove the 2 bolts and 2 compression springs.

(b) Remove the No. 4 exhaust pipe support and remove the No. 2 center exhaust pipe assembly.

(c) Remove the exhaust pipe gasket.

6. REMOVE FRONT FLOOR CENTER BRACE





(a) Remove the 4 bolts and remove the front floor center brace.

7. REMOVE CENTER EXHAUST PIPE ASSEMBLY





(a) Remove the 2 bolts and 2 No. 4 exhaust pipe supports and remove the center exhaust pipe assembly.

(b) Remove the exhaust pipe gasket.

8. REMOVE FRONT EXHAUST PIPE ASSEMBLY





(a) Remove the 2 bolts and 2 compression springs and remove the front exhaust pipe assembly.