Removal

EXTERIOR: REAR BUMPER: REMOVAL

1. REMOVE REAR BUMPER PLATE LH





(a) Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws and remove the rear bumper plate.

2. REMOVE REAR BUMPER PLATE RH

HINT
Use the same procedure as for the LH side.

3. REMOVE REAR BUMPER COVER





(a) Apply protective tape as shown in the illustration.

(b) Remove the 2 bolts and 2 screws.





(c) Remove the 6 clips.

(d) Disengage the 12 claws.





(e) Disconnect the connector and remove the rear bumper cover.