Reassembly

EXTERIOR: REAR BUMPER: REASSEMBLY

1. INSTALL REAR BUMPER ARM SUB-ASSEMBLY LH





(a) Install rear bumper arm with the 3 bolts.

Torque : 50 Nm (510 kgf-cm, 37 ft-lbf)

2. INSTALL REAR BUMPER ARM SUB-ASSEMBLY RH

HINT
Use the same procedure as for the LH side.

3. INSTALL NO. 1 REAR BUMPER REINFORCEMENT





(a) Install the No. 1 rear bumper reinforcement with the 4 nuts.

Torque : 50 Nm (510 kgf-cm, 37 ft-lbf)

4. INSTALL REAR BUMPER ENERGY ABSORBER





(a) Install the rear bumper energy absorber.

5. INSTALL REAR BUMPER SIDE SEAL LH





(a) Install the rear bumper side seal with the 3 clips.

6. INSTALL REAR BUMPER SIDE SEAL RH





(a) Install the rear bumper side seal with the 2 clips.

7. INSTALL REAR BUMPER UPPER RETAINER LH





(a) Engage the 2 claws and install the rear bumper upper retainer.

(b) Tighten the 2 screws.

8. INSTALL REAR BUMPER UPPER RETAINER RH

HINT
Use the same procedure as for the LH side.

9. INSTALL REAR BUMPER SIDE RETAINER LH





(a) Engage the 2 claws and install the rear bumper side retainer.

(b) Tighten the 2 screws.

10. INSTALL REAR BUMPER SIDE RETAINER RH

HINT
Use the same procedure as for the LH side.

11. INSTALL BACK-UP LIGHT ASSEMBLY





(a) Engage the 2 claws and install the back-up light with the screw.