Installation

U241E AUTOMATIC TRANSAXLE: TRANSMISSION REVOLUTION SENSOR: INSTALLATION

1. INSTALL SPEED SENSOR (NC SENSOR)





(a) Coat a new O-ring with ATF and install it to the sensor.

(b) Install the sensor with the bolt.

Torque : 11 Nm (112 kgf-cm, 8 ft-lbf)

(c) Connect the sensor connector.

2. INSTALL SPEED SENSOR (NT SENSOR)





(a) Coat a new O-ring with ATF and install it to the sensor.

(b) Install the sensor with the bolt.

Torque : 11 Nm (112 kgf-cm, 8 ft-lbf)

(c) Connect the sensor connector.

3. INSTALL AIR CLEANER ASSEMBLY

Torque : 5.0 Nm (51 kgf-cm, 44 in-lbf)

4. INSTALL BATTERY CARRIER Installation

5. INSTALL BATTERY Installation

6. PERFORM INITIALIZATION

(a) Perform initialization Testing and Inspection.

NOTICE:

Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.