Removal

SUSPENSION: REAR STABILIZER BAR: REMOVAL

1. REMOVE REAR STABILIZER LINK ASSEMBLY LH





(a) Remove the 2 nuts and stabilizer link LH.

HINT

If the ball joint turns together with the nut, use a 5 mm hexagon wrench to hold the stud.

2. REMOVE REAR STABILIZER LINK ASSEMBLY RH

HINT

Use the same procedures described for the LH side.

3. REMOVE REAR STABILIZER BAR





(a) Remove the 2 bolts, 2 nuts and 2 No. 3 stabilizer bar brackets from the suspension member.

(b) Remove the 2 stabilizer bushes from the stabilizer bar.