Installation

SEAT BELT: FRONT SEAT INNER BELT ASSEMBLY: INSTALLATION

HINT

* Use the same procedures for the RH side and LH side.

* The procedures listed below are for the LH side.

* A bolt without a torque specification is shown in the standard bolt chart Standard Bolt - Specified Torque For Standard Bolts.

1. INSTALL FRONT SEAT INNER BELT ASSEMBLY LH

(a) Install the inner belt with the nut.

Torque : 42 Nm (428 kgf-cm, 31 ft-lbf)

(b) Attach the 5 claws.

(c) Connect the 3 connectors.

2. INSTALL FRONT SEAT ASSEMBLY LH Installation

3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

4. PERFORM INITIALIZATION

(a) Perform initialization Testing and Inspection.

NOTICE:

Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.