Removal

LIGHTING: REAR COMBINATION LIGHT ASSEMBLY: REMOVAL

HINT

* Use the same procedures for the RH side and LH side.

* The procedures listed below are for the LH side.

1. REMOVE REAR BUMPER COVER Removal

2. REMOVE REAR COMBINATION LIGHT SERVICE COVER

(a) Disengage the claw.





(b) Disengage the 2 guides and remove the rear combination light service cover.

3. REMOVE REAR COMBINATION LIGHT ASSEMBLY

(a) Disconnect the connector and disengage the clamp.





(b) Remove the 3 nuts.





(c) Disengage the guide and pin, and remove the rear combination light assembly.